SIKLA Trapezoidal Hanger M10 125806

Trapeze hanger with M10 metric connection for fastening pipes, equipment, or ducts to trapezoidal sheet metal ceilings. Trapeze hanger fully pre-assembled (nut riveted). If it is necessary to support heavier loads on the trapezoidal sheet metal, the load must be distributed evenly over several supports, for example by means of a crossbeam. Permissible load: Fz = 0.8 kN per fastener Observe the permissible load-bearing capacity of the trapezoidal sheet metal. Only pipes with low loads (DN 50) should be attached to trapezoidal sheet metal ceilings. For equipment or ducts, the nominal load per holder should not be exceeded. An M8 x 100 hexagon head screw is recommended for fastening. Each screw connection must be secured with a lock nut. The use of steel blind rivets or self-tapping screws is not permitted in sprinkler systems. Type M10 for sprinkler systems according to FM less than or equal to 3. Material: Steel strip 25 x 2.5 mm, strip-galvanized Brand: TRH - M10 Manufacturer: Sikla