OVENTROP Actuator Lineg, 230 Volt # 1350953

The NR230-00-320 actuator is used for motorized operation of three- and four-way mixing valves. The actuators can be controlled by all commercially available control systems with a 3-point output. The flow temperature increases when the actuator rotates clockwise until the motor stop is reached (flow open, bypass closed). The flow temperature decreases when moving counter-clockwise until the opposite stop is reached (flow closed, bypass open). The rotation angle is limited to 90 degrees. When the end stops are reached, the actuator is electrically switched off and de-energized. In case of control system malfunctions, the drive can be switched to manual operation using an additional rotary knob. For subsequent installation in Regumat M3 DN 25 stations manufactured from 2015 onwards, the actuator mounting kit, article number 1350290, is also required. Technical data: Operating voltage: 230 V 50 Hz Power consumption: 2.5 W Torque: 5 Nm Run time: 140 s Ambient temperature: 0 C to +50 C Connection cable length: 2.2 m